GW5A-138 vs T120
A comparison of the Gowin Arora V GW5A-138 and the Efinix Trion T120 using the data from both vendors' selection guides.
Side-by-side specifications
| GW5A-138 | T120 | |
|---|---|---|
| Vendor / family | Gowin Arora V | Efinix Trion |
| Logic (LUT4-equivalent) | 138,240 | 112,128 |
| LUTs as published | 138,240 LUT4 | — LUT4 |
| Vendor logic figure | — LC | 112,128 LE |
| DSP | 298 27×18 DSP blocks | 320 18×18 multipliers |
| Block RAM | 6 Mb | 5.3 Mb |
| Large RAM | — | — |
| Max. user I/O | 312 | 278 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 22 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 3 |
| Design tool | Gowin EDA | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GW5A-138 has about 23% more logic capacity (138K vs 112K LUT4 equivalents).
For arithmetic, the T120 has 320 18×18 multipliers against 298 27×18 DSP blocks on the GW5A-138.
The GW5A-138 has more on-chip memory (6 Mb vs 5.3 Mb).
The GW5A-138 is designed with Gowin EDA and the T120 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: GW5A-138 (Arora V) and T120 (Trion).