LCMXO1200C vs LCMXO3L-1300
A comparison of the Lattice MachXO LCMXO1200C and the Lattice MachXO3 LCMXO3L-1300 using the data from both vendors' selection guides.
Side-by-side specifications
| LCMXO1200C | LCMXO3L-1300 | |
|---|---|---|
| Vendor / family | Lattice MachXO | Lattice MachXO3 |
| LUTs as published | 1,200 LUT4 | 1,300 LUT4 |
| LUT type | 4-input look-up table | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈1,200 | ≈1,300 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | — | — |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0 Mb | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 211 | 206 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 130 nm | — |
| Configuration memory | Internal flash | — |
| Packages | 5 | 6 |
| Design tool | Lattice Diamond | Lattice Diamond |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The LCMXO3L-1300 has about 8% more logic capacity (1.3K vs 1.2K LUT4 equivalents).
The LCMXO3L-1300 has more on-chip memory (0.1 Mb vs 0 Mb).
Configuration memory: internal flash on the LCMXO1200C, — on the LCMXO3L-1300.
The LCMXO1200C is designed with Lattice Diamond and the LCMXO3L-1300 with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: LCMXO1200C (MachXO) and LCMXO3L-1300 (MachXO3).