LCMXO1200E vs LCMXO2-1200U
A comparison of the Lattice MachXO LCMXO1200E and the Lattice MachXO2 LCMXO2-1200U using the data from both vendors' selection guides.
Side-by-side specifications
| LCMXO1200E | LCMXO2-1200U | |
|---|---|---|
| Vendor / family | Lattice MachXO | Lattice MachXO2 |
| LUTs as published | 1,200 LUT4 | 1,280 LUT4 |
| LUT type | 4-input look-up table | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈1,200 | ≈1,280 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | — | — |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0 Mb | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 211 | 206 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 130 nm | 65 nm |
| Configuration memory | Internal flash | Internal flash |
| Packages | 5 | 1 |
| Design tool | Lattice Diamond | Lattice Diamond |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 1.2K and 1.3K LUT4 equivalents.
The LCMXO2-1200U has more on-chip memory (0.1 Mb vs 0 Mb).
The LCMXO1200E is designed with Lattice Diamond and the LCMXO2-1200U with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: LCMXO1200E (MachXO) and LCMXO2-1200U (MachXO2).