FPGA & adaptive SoC databook · online editionRev. 2026.10

Ti135 vs XCZU3TEG

A comparison of the Efinix Titanium Ti135 and the AMD Zynq UltraScale+ MPSoC XCZU3TEG using the data from both vendors' selection guides.

Side-by-side specifications

Ti135XCZU3TEG
Vendor / familyEfinix TitaniumAMD Zynq UltraScale+ MPSoC
Logic (LUT4-equivalent)129,600115,200
LUTs as published129,600 LUT472,000 LUT6
Vendor logic figure132,192 LE157,000 SLC
DSP480 DSP blocks576 DSP slices
Block RAM9.8 Mb5.1 Mb
Large RAM—14 Mb
Max. user I/O223124
Transceivers8 × SERDES 16 Gb/s8 × GTH 16.3 Gb/s
Hard PCI ExpressGen4 x4Gen3 x8
Hard processor4× RISC-V RV324× Arm Cortex-A53
Process16 nm16 nm
Configuration memorySRAMSRAM
Packages42
Design toolEfinix EfinityAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The Ti135 has about 12% more logic capacity (130K vs 115K LUT4 equivalents).

They use different logic architectures: the Ti135 is built from LUT4 and the XCZU3TEG from LUT6, so the raw LUT counts (130K vs 72K) are not directly comparable.

For arithmetic, the XCZU3TEG has 576 DSP slices against 480 DSP blocks on the Ti135.

The XCZU3TEG has more on-chip memory (19.1 Mb vs 9.8 Mb).

Both have transceivers: 8 at up to 16 Gb/s on the Ti135 and 8 at up to 16.3 Gb/s on the XCZU3TEG.

The Ti135 is designed with Efinix Efinity and the XCZU3TEG with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: Ti135 (Titanium) and XCZU3TEG (Zynq UltraScale+ MPSoC).