LAV-AT-G30
LatticeAvant-GThe LAV-AT-G30 is an Avant-G FPGA from Lattice, built on a 16 nm process. It provides 163,000 LUT4 look-up tables (262,000 logic cells), 14.4 Mb of block RAM and 700 18×18 multipliers. It offers up to 298 user I/O pins and 12 SERDES transceivers at up to 12.5 Gb/s. It is available in 3 packages, from the ASGA410 (9 × 11 mm) to the LFG676 (27 × 27 mm). Temperature grades: commercial, industrial, automotive, d. Designs are built with Lattice Radiant.
Specifications
| Vendor | Lattice |
|---|---|
| Family | Avant-G |
| Series | Avant |
| Process | 16 nm |
| Configuration memory | SRAM |
| LUT4-equivalent capacity | 163,000 |
| Look-up tables (LUT4) | 163,000 |
| Logic cells | 262,000 |
| Distributed RAM | 1,700 Kb |
| Block RAM | 14.4 Mb (400 × 36 Kb) |
| DSP (18×18 multiplier) | 700 |
| Max. user I/O | 298 |
|---|---|
| SERDES transceivers | 12 × 12.5 Gb/s |
| PCI Express | None |
| Analog / monitor | None |
| Design tool | Lattice Radiant |
Packages
| Package | Size (mm) | Pitch (mm) | User I/O | Transceivers |
|---|---|---|---|---|
| ASGA410 | 9 × 11 | 0.5 | 196 | 4 |
| FBG644 | 19 × 23 | 0.8 | 298 | 12 |
| LFG676 | 27 × 27 | 1.0 | 298 | 12 |
Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).
Speed and temperature grades
| Temperature grade | Junction range | Speed grades |
|---|---|---|
| Commercial (C) | 0 to 85 °C | — |
| Industrial (I) | −40 to 100 °C | — |
| Automotive (A) | — | — |
| D (D) | — | — |
Alternatives to the LAV-AT-G30
Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| LAV-AT-X30Lattice Avant-X | 163K 163K LUT4 | 262K LC | 700 | 14.4 Mb | 298 | 12 SERDES 25 Gb/s | — |
| MPF200TMicrochip PolarFire | 192K 192K LUT4 | 192K LE | 588 | 12 Mb | 368 | 16 SERDES 12.7 Gb/s | Gen2 |
| XC7K160TAMD Kintex-7 | 162K 101K LUT6 | 162K LC | 600 | 11.4 Mb | 400 | 8 GTX 12.5 Gb/s | Gen2 |
| Certus-N2 CT20Lattice Certus-N2 | 135K 135K LUT4 | 220K LC | 520 | 12 Mb | 298 | 8 SERDES 16 Gb/s | — |
| XC7A200TAMD Artix-7 | 215K 135K LUT6 | 215K LC | 740 | 12.8 Mb | 500 | 16 GTP 6.6 Gb/s | Gen2 |
| 10AX027Altera Arria 10 | 203K 102K ALMs | 354K LE | 830 | 14.7 Mb | 384 | 24 XCVR 17.4 Gb/s | Gen3 |
Compare side by side: LAV-AT-G30 vs LAV-AT-X30, LAV-AT-G30 vs MPF200T, LAV-AT-G30 vs XC7K160T, LAV-AT-G30 vs Certus-N2 CT20, LAV-AT-G30 vs XC7A200T, LAV-AT-G30 vs 10AX027.
LAV-AT-G30 quick facts
How many LUTs does the LAV-AT-G30 have?
The LAV-AT-G30 has 163,000 LUT4 look-up tables, about 163,000 LUT4 equivalents (262,000 logic cells as published by Lattice).
How many DSP blocks does the LAV-AT-G30 have?
The LAV-AT-G30 has 700 18×18 multipliers and 14.4 Mb of block RAM.
Does the LAV-AT-G30 have transceivers?
Yes, 12 SERDES transceivers at up to 12.5 Gb/s.
What are the alternatives to the LAV-AT-G30?
Devices of similar size in other families include LAV-AT-X30 (Lattice Avant-X), MPF200T (Microchip PolarFire), XC7K160T (AMD Kintex-7).
Which software is used to design with the LAV-AT-G30?
Designs for the LAV-AT-G30 are built with Lattice Radiant.
Other Avant-G devices
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| LAV-AT-G30 | 163K 163K LUT4 | 262K LC | 700 | 14.4 Mb | 298 | 12 SERDES 12.5 Gb/s | — |
| LAV-AT-G50 | 255K 255K LUT4 | 409K LC | 1,120 | 22.7 Mb | 298 | 16 SERDES 12.5 Gb/s | — |
| LAV-AT-G70 | 397K 397K LUT4 | 637K LC | 1,800 | 35.6 Mb | 554 | 28 SERDES 12.5 Gb/s | — |
Source: Lattice Avant-G product page, Family Table, retrieved 2026-10-24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.