FPGA & adaptive SoC databook · online editionRev. 2026.10

10AX115 vs XCVU095

A comparison of the Altera Arria 10 10AX115 and the AMD Virtex UltraScale XCVU095 using the data from both vendors' selection guides.

Side-by-side specifications

10AX115XCVU095
Vendor / familyAltera Arria 10AMD Virtex UltraScale
LUTs as published427,200 ALMs537,600 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈854,400≈860,160
CoreScore (SERV cores)2,600—
Vendor logic figure1,506,000 LE1,176,000 SLC
DSP1,518 variable-precision DSP blocks768 DSP slices
Block RAM53 Mb60.8 Mb
Large RAM——
Max. user I/O768832
Transceivers96 × XCVR 17.4 Gb/s32 × GTH 16.3 Gb/s, 32 × GTY 30.5 Gb/s
Hard PCI ExpressGen3 x8Gen3
Hard processorNoneNone
Process20 nm20 nm
Configuration memorySRAMSRAM
Packages36
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 854K and 860K LUT4 equivalents.

They use different logic architectures: the 10AX115 is built from ALMs and the XCVU095 from LUT6, so the raw LUT counts (427K vs 538K) are not directly comparable.

For arithmetic, the 10AX115 has 1,518 variable-precision DSP blocks against 768 DSP slices on the XCVU095.

The XCVU095 has more on-chip memory (60.8 Mb vs 53 Mb).

Both have transceivers: 96 at up to 17.4 Gb/s on the 10AX115 and 64 at up to 30.5 Gb/s on the XCVU095.

The 10AX115 is designed with Altera Quartus Prime and the XCVU095 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: 10AX115 (Arria 10) and XCVU095 (Virtex UltraScale).