FPGA & adaptive SoC databook · online editionRev. 2026.10

5AGTD3 vs MPF300T

A comparison of the Altera Arria V 5AGTD3 and the Microchip PolarFire MPF300T using the data from both vendors' selection guides.

Side-by-side specifications

5AGTD3MPF300T
Vendor / familyAltera Arria VMicrochip PolarFire
LUTs as published136,880 ALMs300,000 LUT4
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)4-input look-up table
LUT4 equivalent (approx.)≈273,760≈300,000
CoreScore (SERV cores)—882
Vendor logic figure362,000 LE300,000 LE
DSP1,045 variable-precision DSP blocks924 18×18 math blocks (MACC)
Block RAM16.9 Mb18.6 Mb
Large RAM——
Max. user I/O704512
Transceivers6 × XCVR 6.5536 Gb/s, 12 × XCVR 10.3125 Gb/s16 × SERDES 12.7 Gb/s
Hard PCI ExpressGen2 x4Gen2 x4
Hard processorNoneNone
Process28 nm28 nm
Configuration memorySRAMNon-volatile (SONOS flash)
Packages35
Design toolAltera Quartus PrimeMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The MPF300T has about 10% more logic capacity (300K vs 274K LUT4 equivalents).

They use different logic architectures: the 5AGTD3 is built from ALMs and the MPF300T from LUT4, so the raw LUT counts (137K vs 300K) are not directly comparable.

For arithmetic, the 5AGTD3 has 1,045 variable-precision DSP blocks against 924 18×18 math blocks (MACC) on the MPF300T.

Both have transceivers: 18 at up to 10.3125 Gb/s on the 5AGTD3 and 16 at up to 12.7 Gb/s on the MPF300T.

Configuration memory: sram on the 5AGTD3, non-volatile (sonos flash) on the MPF300T.

The 5AGTD3 is designed with Altera Quartus Prime and the MPF300T with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: 5AGTD3 (Arria V) and MPF300T (PolarFire).