5ASTD5 vs Ti450
A comparison of the Altera Arria V 5ASTD5 and the Efinix Titanium Ti450 using the data from both vendors' selection guides.
Side-by-side specifications
| 5ASTD5 | Ti450 | |
|---|---|---|
| Vendor / family | Altera Arria V | Efinix Titanium |
| LUTs as published | 174,340 ALMs | Not published |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈348,680 | ≈447,890 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 462,000 LE | 447,890 LE |
| DSP | 1,090 variable-precision DSP blocks | 862 DSP blocks |
| Block RAM | 22.3 Mb | 26.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 540 | 480 |
| Transceivers | 30 × XCVR 6.5536 Gb/s, 16 × XCVR 10.3125 Gb/s | 24 × SERDES 25.8 Gb/s |
| Hard PCI Express | Gen2 x4 | Gen4 x8 |
| Hard processor | 2× Arm Cortex-A9 | 4× RISC-V RV64 |
| Process | 28 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The Ti450 has about 28% more logic capacity (448K vs 349K LUT4 equivalents).
They use different logic architectures: the 5ASTD5 is built from ALMs and the Ti450 from LUT4, so the raw LUT counts (174K vs —) are not directly comparable.
For arithmetic, the 5ASTD5 has 1,090 variable-precision DSP blocks against 862 DSP blocks on the Ti450.
The Ti450 has more on-chip memory (26.6 Mb vs 22.3 Mb).
Both have transceivers: 46 at up to 10.3125 Gb/s on the 5ASTD5 and 24 at up to 25.8 Gb/s on the Ti450.
The 5ASTD5 is designed with Altera Quartus Prime and the Ti450 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: 5ASTD5 (Arria V) and Ti450 (Titanium).