FPGA & adaptive SoC databook · online editionRev. 2026.10

5ASXB3 vs MPFS250T

A comparison of the Altera Arria V 5ASXB3 and the Microchip PolarFire SoC MPFS250T using the data from both vendors' selection guides.

Side-by-side specifications

5ASXB3MPFS250T
Vendor / familyAltera Arria VMicrochip PolarFire SoC
LUTs as published132,075 ALMs254,000 LUT4
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)4-input look-up table
LUT4 equivalent (approx.)≈264,150≈254,000
CoreScore (SERV cores)——
Vendor logic figure350,000 LE254,000 LE
DSP809 variable-precision DSP blocks784 18×18 math blocks (MACC)
Block RAM16.9 Mb15.9 Mb
Large RAM——
Max. user I/O540372
Transceivers30 × XCVR 6.5536 Gb/s16 × SERDES 12.5 Gb/s
Hard PCI ExpressGen2 x4Gen2 x4
Hard processor2× Arm Cortex-A94× RISC-V (RV64GC U54)
Process28 nm28 nm
Configuration memorySRAMNon-volatile (SONOS flash)
Packages34
Design toolAltera Quartus PrimeMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 264K and 254K LUT4 equivalents.

They use different logic architectures: the 5ASXB3 is built from ALMs and the MPFS250T from LUT4, so the raw LUT counts (132K vs 254K) are not directly comparable.

For arithmetic, the 5ASXB3 has 809 variable-precision DSP blocks against 784 18×18 math blocks (MACC) on the MPFS250T.

Both have transceivers: 30 at up to 6.5536 Gb/s on the 5ASXB3 and 16 at up to 12.5 Gb/s on the MPFS250T.

Configuration memory: sram on the 5ASXB3, non-volatile (sonos flash) on the MPFS250T.

The 5ASXB3 is designed with Altera Quartus Prime and the MPFS250T with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: 5ASXB3 (Arria V) and MPFS250T (PolarFire SoC).