FPGA & adaptive SoC databook · online editionRev. 2026.10

5CGXC4 vs M2GL050

A comparison of the Altera Cyclone V 5CGXC4 and the Microchip IGLOO2 M2GL050 using the data from both vendors' selection guides.

Side-by-side specifications

5CGXC4M2GL050
Vendor / familyAltera Cyclone VMicrochip IGLOO2
LUTs as published18,868 ALMs56,340 LUT4
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)4-input look-up table
LUT4 equivalent (approx.)≈37,736≈56,340
CoreScore (SERV cores)——
Vendor logic figure50,000 LE56,340 LE
DSP70 variable-precision DSP blocks72 18×18 math blocks (MACC)
Block RAM2.4 Mb1.2 Mb
Large RAM——
Max. user I/O336377
Transceivers6 × XCVR 3.125 Gb/s8 × SERDES 5 Gb/s
Hard PCI ExpressGen1Gen2
Hard processorNoneNone
Process28 nm65 nm
Configuration memorySRAMNon-volatile (flash)
Packages54
Design toolAltera Quartus PrimeMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The M2GL050 has about 49% more logic capacity (56.3K vs 37.7K LUT4 equivalents).

They use different logic architectures: the 5CGXC4 is built from ALMs and the M2GL050 from LUT4, so the raw LUT counts (18.9K vs 56.3K) are not directly comparable.

For arithmetic, the M2GL050 has 72 18×18 math blocks (MACC) against 70 variable-precision DSP blocks on the 5CGXC4.

The 5CGXC4 has more on-chip memory (2.4 Mb vs 1.2 Mb).

Both have transceivers: 6 at up to 3.125 Gb/s on the 5CGXC4 and 8 at up to 5 Gb/s on the M2GL050.

Configuration memory: sram on the 5CGXC4, non-volatile (flash) on the M2GL050.

The 5CGXC4 is designed with Altera Quartus Prime and the M2GL050 with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: 5CGXC4 (Cyclone V) and M2GL050 (IGLOO2).