FPGA & adaptive SoC databook · online editionRev. 2026.10

5CSTD5 vs M2S060

A comparison of the Altera Cyclone V 5CSTD5 and the Microchip SmartFusion2 M2S060 using the data from both vendors' selection guides.

Side-by-side specifications

5CSTD5M2S060
Vendor / familyAltera Cyclone VMicrochip SmartFusion2
LUTs as published32,070 ALMs56,520 LUT4
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)4-input look-up table
LUT4 equivalent (approx.)≈64,140≈56,520
CoreScore (SERV cores)——
Vendor logic figure85,000 LE56,520 LE
DSP87 variable-precision DSP blocks72 18×18 math blocks (MACC)
Block RAM3.9 Mb1.2 Mb
Large RAM——
Max. user I/O288395
Transceivers9 × XCVR 6.144 Gb/s4 × SERDES 5 Gb/s
Hard PCI ExpressGen2Gen2
Hard processor2× Arm Cortex-A91× Arm Cortex-M3
Process28 nm65 nm
Configuration memorySRAMNon-volatile (flash)
Packages15
Design toolAltera Quartus PrimeMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The 5CSTD5 has about 13% more logic capacity (64.1K vs 56.5K LUT4 equivalents).

They use different logic architectures: the 5CSTD5 is built from ALMs and the M2S060 from LUT4, so the raw LUT counts (32.1K vs 56.5K) are not directly comparable.

For arithmetic, the 5CSTD5 has 87 variable-precision DSP blocks against 72 18×18 math blocks (MACC) on the M2S060.

The 5CSTD5 has more on-chip memory (3.9 Mb vs 1.2 Mb).

Both have transceivers: 9 at up to 6.144 Gb/s on the 5CSTD5 and 4 at up to 5 Gb/s on the M2S060.

Configuration memory: sram on the 5CSTD5, non-volatile (flash) on the M2S060.

The 5CSTD5 is designed with Altera Quartus Prime and the M2S060 with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: 5CSTD5 (Cyclone V) and M2S060 (SmartFusion2).