5SGTC5 vs GX 400
A comparison of the Altera Stratix V 5SGTC5 and the Altera Stratix 10 GX/SX GX 400 using the data from both vendors' selection guides.
Side-by-side specifications
| 5SGTC5 | GX 400 | |
|---|---|---|
| Vendor / family | Altera Stratix V | Altera Stratix 10 GX/SX |
| LUTs as published | 160,400 ALMs | 128,160 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈320,800 | ≈256,320 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 425,000 LE | 378,000 LE |
| DSP | 256 variable-precision DSP blocks | 648 variable-precision DSP blocks |
| Block RAM | 45 Mb | 30 Mb |
| Large RAM | — | — |
| Max. user I/O | 600 | 374 |
| Transceivers | 4 × GT 28.05 Gb/s, 32 × GX 12.5 Gb/s | 16 × XCVR 28.3 Gb/s, 8 × XCVR 17.4 Gb/s |
| Hard PCI Express | Gen3 | Gen3 x16 |
| Hard processor | None | None |
| Process | 28 nm | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 1 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The 5SGTC5 has about 25% more logic capacity (321K vs 256K LUT4 equivalents).
For arithmetic, the GX 400 has 648 variable-precision DSP blocks against 256 variable-precision DSP blocks on the 5SGTC5.
The 5SGTC5 has more on-chip memory (45 Mb vs 30 Mb).
Both have transceivers: 36 at up to 28.05 Gb/s on the 5SGTC5 and 24 at up to 28.3 Gb/s on the GX 400.
The 5SGTC5 is designed with Altera Quartus Prime and the GX 400 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 5SGTC5 (Stratix V) and GX 400 (Stratix 10 GX/SX).