5SGTC7 vs XCVU080
A comparison of the Altera Stratix V 5SGTC7 and the AMD Virtex UltraScale XCVU080 using the data from both vendors' selection guides.
Side-by-side specifications
| 5SGTC7 | XCVU080 | |
|---|---|---|
| Vendor / family | Altera Stratix V | AMD Virtex UltraScale |
| LUTs as published | 234,720 ALMs | 445,712 LUT6 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈469,440 | ≈713,139 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 622,000 LE | 975,000 SLC |
| DSP | 256 variable-precision DSP blocks | 672 DSP slices |
| Block RAM | 50 Mb | 50 Mb |
| Large RAM | — | — |
| Max. user I/O | 600 | 832 |
| Transceivers | 4 × GT 28.05 Gb/s, 32 × GX 12.5 Gb/s | 32 × GTH 16.3 Gb/s, 32 × GTY 30.5 Gb/s |
| Hard PCI Express | Gen3 | Gen3 |
| Hard processor | None | None |
| Process | 28 nm | 20 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 5 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The XCVU080 has about 52% more logic capacity (713K vs 469K LUT4 equivalents).
They use different logic architectures: the 5SGTC7 is built from ALMs and the XCVU080 from LUT6, so the raw LUT counts (235K vs 446K) are not directly comparable.
For arithmetic, the XCVU080 has 672 DSP slices against 256 variable-precision DSP blocks on the 5SGTC7.
Both have transceivers: 36 at up to 28.05 Gb/s on the 5SGTC7 and 64 at up to 30.5 Gb/s on the XCVU080.
The 5SGTC7 is designed with Altera Quartus Prime and the XCVU080 with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: 5SGTC7 (Stratix V) and XCVU080 (Virtex UltraScale).