FPGA & adaptive SoC databook · online editionRev. 2026.10

A5E 028A vs XC2VE3304

A comparison of the Altera Agilex 5 E-Series A5E 028A and the AMD Versal AI Edge Gen 2 XC2VE3304 using the data from both vendors' selection guides.

Side-by-side specifications

A5E 028AXC2VE3304
Vendor / familyAltera Agilex 5 E-SeriesAMD Versal AI Edge Gen 2
LUTs as published95,680 ALMs94,592 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈191,360≈151,347
CoreScore (SERV cores)——
Vendor logic figure282,256 LE206,920 SLC
DSP376 variable-precision DSP blocks184 DSP Engines
Block RAM14 Mb5 Mb
Large RAM—13.2 Mb
Max. user I/O392308
Transceivers12 × XCVR 28 Gb/s4 × GTYP 32.75 Gb/s
Hard PCI ExpressGen4 x4Gen5 x4
Hard processor4× Arm Cortex-A76 + Cortex-A55 (optional)4× Arm Cortex-A78AE
ProcessIntel 7—
Configuration memorySRAMSRAM
Packages22
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The A5E 028A has about 26% more logic capacity (191K vs 151K LUT4 equivalents).

They use different logic architectures: the A5E 028A is built from ALMs and the XC2VE3304 from LUT6, so the raw LUT counts (95.7K vs 94.6K) are not directly comparable.

For arithmetic, the A5E 028A has 376 variable-precision DSP blocks against 184 DSP Engines on the XC2VE3304.

The XC2VE3304 has more on-chip memory (18.2 Mb vs 14 Mb).

Both have transceivers: 12 at up to 28 Gb/s on the A5E 028A and 4 at up to 32.75 Gb/s on the XC2VE3304.

The A5E 028A is designed with Altera Quartus Prime and the XC2VE3304 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: A5E 028A (Agilex 5 E-Series) and XC2VE3304 (Versal AI Edge Gen 2).