AGF 008 vs TX 850
A comparison of the Altera Agilex 7 F-Series AGF 008 and the Altera Stratix 10 TX TX 850 using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 008 | TX 850 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | Altera Stratix 10 TX |
| LUTs as published | 259,200 ALMs | 284,960 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈518,400 | ≈569,920 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 764,640 LE | 841,000 LE |
| DSP | 2,296 variable-precision DSP blocks | 2,016 variable-precision DSP blocks |
| Block RAM | 74 Mb | 68 Mb |
| Large RAM | — | — |
| Max. user I/O | 576 | 440 |
| Transceivers | 32 × XCVR 58 Gb/s | 48 × GXE 57.8 Gb/s, 16 × GXT 28.3 Gb/s, 8 × GX 17.4 Gb/s |
| Hard PCI Express | None | Gen3 x16 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 (optional) |
| Process | Intel 7 | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The TX 850 has about 10% more logic capacity (570K vs 518K LUT4 equivalents).
For arithmetic, the AGF 008 has 2,296 variable-precision DSP blocks against 2,016 variable-precision DSP blocks on the TX 850.
Both have transceivers: 32 at up to 58 Gb/s on the AGF 008 and 72 at up to 57.8 Gb/s on the TX 850.
The AGF 008 is designed with Altera Quartus Prime and the TX 850 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: AGF 008 (Agilex 7 F-Series) and TX 850 (Stratix 10 TX).