AGI 022 vs TX 2500
A comparison of the Altera Agilex 7 I-Series AGI 022 and the Altera Stratix 10 TX TX 2500 using the data from both vendors' selection guides.
Side-by-side specifications
| AGI 022 | TX 2500 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 I-Series | Altera Stratix 10 TX |
| LUTs as published | 748,500 ALMs | 821,150 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈1,497,000 | ≈1,642,300 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 2,208,075 LE | 2,422,000 LE |
| DSP | 6,250 variable-precision DSP blocks | 5,011 variable-precision DSP blocks |
| Block RAM | 212 Mb | 195 Mb |
| Large RAM | — | — |
| Max. user I/O | 720 | 440 |
| Transceivers | 64 × XCVR 116 Gb/s | 120 × GXE 57.8 Gb/s, 16 × GXT 28.3 Gb/s, 8 × GX 17.4 Gb/s |
| Hard PCI Express | None | Gen3 x16 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 (optional) |
| Process | Intel 7 | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The TX 2500 has about 10% more logic capacity (1642K vs 1497K LUT4 equivalents).
For arithmetic, the AGI 022 has 6,250 variable-precision DSP blocks against 5,011 variable-precision DSP blocks on the TX 2500.
Both have transceivers: 64 at up to 116 Gb/s on the AGI 022 and 144 at up to 57.8 Gb/s on the TX 2500.
The AGI 022 is designed with Altera Quartus Prime and the TX 2500 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: AGI 022 (Agilex 7 I-Series) and TX 2500 (Stratix 10 TX).