FPGA & adaptive SoC databook · online editionRev. 2026.10

AGI 040 vs XCVP2802

A comparison of the Altera Agilex 7 I-Series AGI 040 and the AMD Versal Premium XCVP2802 using the data from both vendors' selection guides.

Side-by-side specifications

AGI 040XCVP2802
Vendor / familyAltera Agilex 7 I-SeriesAMD Versal Premium
LUTs as published1,372,000 ALMs3,349,120 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈2,744,000≈5,358,592
CoreScore (SERV cores)8,225—
Vendor logic figure4,047,400 LE7,326,000 SLC
DSP12,792 variable-precision DSP blocks14,304 DSP Engines
Block RAM389 Mb174 Mb
Large RAM—717 Mb
Max. user I/O576702
Transceivers96 × XCVR 116 Gb/s28 × GTYP 32.75 Gb/s, 140 × GTM 58 Gb/s
Hard PCI ExpressNoneGen5 x8, Gen5 x4
Hard processor4× Arm Cortex-A53 (optional)2× Arm Cortex-A72
ProcessIntel 77 nm
Configuration memorySRAMSRAM
Packages11
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The XCVP2802 has about 95% more logic capacity (5359K vs 2744K LUT4 equivalents).

They use different logic architectures: the AGI 040 is built from ALMs and the XCVP2802 from LUT6, so the raw LUT counts (1372K vs 3349K) are not directly comparable.

For arithmetic, the XCVP2802 has 14,304 DSP Engines against 12,792 variable-precision DSP blocks on the AGI 040.

The XCVP2802 has more on-chip memory (891 Mb vs 389 Mb).

Both have transceivers: 96 at up to 116 Gb/s on the AGI 040 and 168 at up to 58 Gb/s on the XCVP2802.

The AGI 040 is designed with Altera Quartus Prime and the XCVP2802 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: AGI 040 (Agilex 7 I-Series) and XCVP2802 (Versal Premium).