DX 1100 vs Ti1600
A comparison of the Altera Stratix 10 DX DX 1100 and the Efinix Titanium Ti1600 using the data from both vendors' selection guides.
Side-by-side specifications
| DX 1100 | Ti1600 | |
|---|---|---|
| Vendor / family | Altera Stratix 10 DX | Efinix Titanium |
| LUTs as published | 449,280 ALMs | Not published |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈898,560 | ≈1,578,000 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 1,325,000 LE | 1,578,000 LE |
| DSP | 2,592 variable-precision DSP blocks | 3,050 DSP blocks |
| Block RAM | 107 Mb | 93.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 528 | 480 |
| Transceivers | 16 × GXP 16 Gb/s, 16 × GXE 57.8 Gb/s | 40 × SERDES 25.8 Gb/s |
| Hard PCI Express | Gen4 x16 | Gen4 x8 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× RISC-V RV64 |
| Process | 14 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 2 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The Ti1600 has about 76% more logic capacity (1578K vs 899K LUT4 equivalents).
They use different logic architectures: the DX 1100 is built from ALMs and the Ti1600 from LUT4, so the raw LUT counts (449K vs —) are not directly comparable.
For arithmetic, the Ti1600 has 3,050 DSP blocks against 2,592 variable-precision DSP blocks on the DX 1100.
The DX 1100 has more on-chip memory (107 Mb vs 93.6 Mb).
Both have transceivers: 32 at up to 57.8 Gb/s on the DX 1100 and 40 at up to 25.8 Gb/s on the Ti1600.
The DX 1100 is designed with Altera Quartus Prime and the Ti1600 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: DX 1100 (Stratix 10 DX) and Ti1600 (Titanium).