FPGA & adaptive SoC databook · online editionRev. 2026.10

DX 1100 vs XC2VM3858

A comparison of the Altera Stratix 10 DX DX 1100 and the AMD Versal Prime Gen 2 XC2VM3858 using the data from both vendors' selection guides.

Side-by-side specifications

DX 1100XC2VM3858
Vendor / familyAltera Stratix 10 DXAMD Versal Prime Gen 2
LUTs as published449,280 ALMs543,104 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈898,560≈868,966
CoreScore (SERV cores)——
Vendor logic figure1,325,000 LE1,188,040 SLC
DSP2,592 variable-precision DSP blocks2,064 DSP Engines
Block RAM107 Mb47.2 Mb
Large RAM—33.2 Mb
Max. user I/O528556
Transceivers16 × GXP 16 Gb/s, 16 × GXE 57.8 Gb/s20 × GTYP 32.75 Gb/s
Hard PCI ExpressGen4 x16Gen5 x4
Hard processor4× Arm Cortex-A53 (optional)8× Arm Cortex-A78AE
Process14 nm—
Configuration memorySRAMSRAM
Packages11
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 899K and 869K LUT4 equivalents.

They use different logic architectures: the DX 1100 is built from ALMs and the XC2VM3858 from LUT6, so the raw LUT counts (449K vs 543K) are not directly comparable.

For arithmetic, the DX 1100 has 2,592 variable-precision DSP blocks against 2,064 DSP Engines on the XC2VM3858.

The DX 1100 has more on-chip memory (107 Mb vs 80.4 Mb).

Both have transceivers: 32 at up to 57.8 Gb/s on the DX 1100 and 20 at up to 32.75 Gb/s on the XC2VM3858.

The DX 1100 is designed with Altera Quartus Prime and the XC2VM3858 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: DX 1100 (Stratix 10 DX) and XC2VM3858 (Versal Prime Gen 2).