FPGA & adaptive SoC databook · online editionRev. 2026.10

EP2AGX190 vs RT4G150

A comparison of the Altera Arria II EP2AGX190 and the Microchip RTG4 RT4G150 using the data from both vendors' selection guides.

Side-by-side specifications

EP2AGX190RT4G150
Vendor / familyAltera Arria IIMicrochip RTG4
LUTs as published76,120 ALMs151,824 LUT4
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)4-input look-up table
LUT4 equivalent (approx.)≈152,240≈151,824
CoreScore (SERV cores)——
Vendor logic figure181,000 LE151,824 LE
DSP656 18×18 multipliers462 18×18 math blocks
Block RAM7.4 Mb5 Mb
Large RAM——
Max. user I/O612720
Transceivers16 × XCVR 6.375 Gb/s24 × SerDes 3.125 Gb/s
Hard PCI ExpressGen1Gen1
Hard processorNoneNone
Process40 nm65 nm
Configuration memorySRAMNon-volatile (flash)
Packages24
Design toolAltera Quartus PrimeMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 152K and 152K LUT4 equivalents.

They use different logic architectures: the EP2AGX190 is built from ALMs and the RT4G150 from LUT4, so the raw LUT counts (76.1K vs 152K) are not directly comparable.

For arithmetic, the EP2AGX190 has 656 18×18 multipliers against 462 18×18 math blocks on the RT4G150.

The EP2AGX190 has more on-chip memory (7.4 Mb vs 5 Mb).

Both have transceivers: 16 at up to 6.375 Gb/s on the EP2AGX190 and 24 at up to 3.125 Gb/s on the RT4G150.

Configuration memory: sram on the EP2AGX190, non-volatile (flash) on the RT4G150.

The EP2AGX190 is designed with Altera Quartus Prime and the RT4G150 with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: EP2AGX190 (Arria II) and RT4G150 (RTG4).