FPGA & adaptive SoC databook · online editionRev. 2026.10

GW5AT-138 vs M2GL150

A comparison of the Gowin Arora V GW5AT-138 and the Microchip IGLOO2 M2GL150 using the data from both vendors' selection guides.

Side-by-side specifications

GW5AT-138M2GL150
Vendor / familyGowin Arora VMicrochip IGLOO2
LUTs as published138,240 LUT4146,124 LUT4
LUT type4-input look-up table4-input look-up table
LUT4 equivalent (approx.)≈138,240≈146,124
CoreScore (SERV cores)——
Vendor logic figure—146,124 LE
DSP298 27×18 DSP blocks240 18×18 math blocks (MACC)
Block RAM6 Mb4.2 Mb
Large RAM——
Max. user I/O312574
Transceivers8 × SERDES 12.5 Gb/s16 × SERDES 5 Gb/s
Hard PCI ExpressGen3 x8Gen2
Hard processorNoneNone
Process22 nm65 nm
Configuration memorySRAMNon-volatile (flash)
Packages63
Design toolGowin EDAMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 138K and 146K LUT4 equivalents.

For arithmetic, the GW5AT-138 has 298 27×18 DSP blocks against 240 18×18 math blocks (MACC) on the M2GL150.

The GW5AT-138 has more on-chip memory (6 Mb vs 4.2 Mb).

Both have transceivers: 8 at up to 12.5 Gb/s on the GW5AT-138 and 16 at up to 5 Gb/s on the M2GL150.

Configuration memory: sram on the GW5AT-138, non-volatile (flash) on the M2GL150.

The GW5AT-138 is designed with Gowin EDA and the M2GL150 with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: GW5AT-138 (Arora V) and M2GL150 (IGLOO2).