FPGA & adaptive SoC databook · online editionRev. 2026.10

GW5AT-60 vs M2GL060

A comparison of the Gowin Arora V GW5AT-60 and the Microchip IGLOO2 M2GL060 using the data from both vendors' selection guides.

Side-by-side specifications

GW5AT-60M2GL060
Vendor / familyGowin Arora VMicrochip IGLOO2
LUTs as published59,904 LUT456,520 LUT4
LUT type4-input look-up table4-input look-up table
LUT4 equivalent (approx.)≈59,904≈56,520
CoreScore (SERV cores)——
Vendor logic figure—56,520 LE
DSP118 27×18 DSP blocks72 18×18 math blocks (MACC)
Block RAM2.1 Mb1.2 Mb
Large RAM——
Max. user I/O320387
Transceivers4 × SERDES 12.5 Gb/s4 × SERDES 5 Gb/s
Hard PCI ExpressGen3 x4Gen2
Hard processorNoneNone
Process22 nm65 nm
Configuration memorySRAMNon-volatile (flash)
Packages74
Design toolGowin EDAMicrochip Libero SoC

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 59.9K and 56.5K LUT4 equivalents.

For arithmetic, the GW5AT-60 has 118 27×18 DSP blocks against 72 18×18 math blocks (MACC) on the M2GL060.

The GW5AT-60 has more on-chip memory (2.1 Mb vs 1.2 Mb).

Both have transceivers: 4 at up to 12.5 Gb/s on the GW5AT-60 and 4 at up to 5 Gb/s on the M2GL060.

Configuration memory: sram on the GW5AT-60, non-volatile (flash) on the M2GL060.

The GW5AT-60 is designed with Gowin EDA and the M2GL060 with Microchip Libero SoC.

Full specifications

See the complete spec sheets with packages and grades: GW5AT-60 (Arora V) and M2GL060 (IGLOO2).