FPGA & adaptive SoC databook · online editionRev. 2026.10

GX 2100 vs XCVU190

A comparison of the Altera Stratix 10 GX/SX GX 2100 and the AMD Virtex UltraScale XCVU190 using the data from both vendors' selection guides.

Side-by-side specifications

GX 2100XCVU190
Vendor / familyAltera Stratix 10 GX/SXAMD Virtex UltraScale
LUTs as published679,680 ALMs1,074,240 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈1,359,360≈1,718,784
CoreScore (SERV cores)——
Vendor logic figure2,005,000 LE2,350,000 SLC
DSP3,744 variable-precision DSP blocks1,800 DSP slices
Block RAM127 Mb132.9 Mb
Large RAM——
Max. user I/O704702
Transceivers64 × XCVR 28.3 Gb/s, 32 × XCVR 17.4 Gb/s60 × GTH 16.3 Gb/s, 60 × GTY 30.5 Gb/s
Hard PCI ExpressGen3 x16Gen3
Hard processorNoneNone
Process14 nm20 nm
Configuration memorySRAMSRAM
Packages23
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The XCVU190 has about 26% more logic capacity (1719K vs 1359K LUT4 equivalents).

They use different logic architectures: the GX 2100 is built from ALMs and the XCVU190 from LUT6, so the raw LUT counts (680K vs 1074K) are not directly comparable.

For arithmetic, the GX 2100 has 3,744 variable-precision DSP blocks against 1,800 DSP slices on the XCVU190.

Both have transceivers: 96 at up to 28.3 Gb/s on the GX 2100 and 120 at up to 30.5 Gb/s on the XCVU190.

The GX 2100 is designed with Altera Quartus Prime and the XCVU190 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: GX 2100 (Stratix 10 GX/SX) and XCVU190 (Virtex UltraScale).