LAV-AT-G70 vs LAV-AT-X70
A comparison of the Lattice Avant-G LAV-AT-G70 and the Lattice Avant-X LAV-AT-X70 using the data from both vendors' selection guides.
Side-by-side specifications
| LAV-AT-G70 | LAV-AT-X70 | |
|---|---|---|
| Vendor / family | Lattice Avant-G | Lattice Avant-X |
| Logic (LUT4-equivalent) | 397,000 | 397,000 |
| LUTs as published | 397,000 LUT4 | 397,000 LUT4 |
| Vendor logic figure | 637,000 LC | 637,000 LC |
| DSP | 1,800 18×18 multipliers | 1,800 18×18 multipliers |
| Block RAM | 35.6 Mb | 35.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 554 | 554 |
| Transceivers | 28 × SERDES 12.5 Gb/s | 28 × SERDES 25 Gb/s |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 16 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Lattice Radiant | Lattice Radiant |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
Both devices offer similar logic capacity: 397K and 397K LUT4 equivalents.
Both have transceivers: 28 at up to 12.5 Gb/s on the LAV-AT-G70 and 28 at up to 25 Gb/s on the LAV-AT-X70.
The LAV-AT-G70 is designed with Lattice Radiant and the LAV-AT-X70 with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: LAV-AT-G70 (Avant-G) and LAV-AT-X70 (Avant-X).