LAV-AT-X70

LatticeAvant-X

The LAV-AT-X70 is an Avant-X FPGA from Lattice, built on a 16 nm process. It provides 397,000 LUT4 look-up tables (637,000 logic cells), 35.6 Mb of block RAM and 1,800 18×18 multipliers. It offers up to 554 user I/O pins and 28 SERDES transceivers at up to 25 Gb/s. It is available in 2 packages, from the LFG676 (27 × 27 mm) to the LFG1156 (35 × 35 mm). Temperature grades: commercial, industrial, automotive, d. Designs are built with Lattice Radiant.

397KLUT4-equivalent

397KLUTs (LUT4)

1,80018×18 multipliers

35.6 MbBlock RAM

554Max. user I/O

28Transceivers (25 Gb/s)

Specifications

Vendor	Lattice
Family	Avant-X
Series	Avant
Process	16 nm
Configuration memory	SRAM
LUT4-equivalent capacity	397,000
Look-up tables (LUT4)	397,000
Logic cells	637,000
Distributed RAM	4,140 Kb
Block RAM	35.6 Mb (990 × 36 Kb)
DSP (18×18 multiplier)	1,800

Max. user I/O	554
SERDES transceivers	28 × 25 Gb/s
PCI Express	None
Analog / monitor	None
Design tool	Lattice Radiant

Packages

Package	Size (mm)	Pitch (mm)	User I/O	Transceivers
LFG676	27 × 27	1.0	298	16
LFG1156	35 × 35	1.0	554	28

Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).

Speed and temperature grades

Temperature grade	Junction range	Speed grades
Commercial (C)	0 to 85 °C	—
Industrial (I)	−40 to 100 °C	—
Automotive (A)	—	—
D (D)	—	—

Alternatives to the LAV-AT-X70

Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.

Device	LUT4-eq.	Vendor logic	DSP	Block RAM	Max I/O	Transceivers	PCIe
LAV-AT-G70Lattice Avant-G	397K 397K LUT4	637K LC	1,800	35.6 Mb	554	28 SERDES 12.5 Gb/s	—
XC2KU050PAMD Kintex UltraScale+ Gen 2	360K 225K LUT6	491K SLC	1,872	17.7 Mb	516	24 GTY 32.75 Gb/s	Gen4
XC7K480TAMD Kintex-7	478K 299K LUT6	478K LC	1,920	33.6 Mb	400	32 GTX 12.5 Gb/s	Gen2
XC7K420TAMD Kintex-7	417K 261K LUT6	417K LC	1,680	29.4 Mb	400	32 GTX 12.5 Gb/s	Gen2
MPF500TMicrochip PolarFire	481K 481K LUT4	481K LE	1,480	29.7 Mb	584	24 SERDES 12.7 Gb/s	Gen2
10AX057Altera Arria 10	434K 217K ALMs	747K LE	1,523	35.2 Mb	696	48 XCVR 17.4 Gb/s	Gen3

Compare side by side: LAV-AT-X70 vs LAV-AT-G70, LAV-AT-X70 vs XC2KU050P, LAV-AT-X70 vs XC7K480T, LAV-AT-X70 vs XC7K420T, LAV-AT-X70 vs MPF500T.

LAV-AT-X70 quick facts

How many LUTs does the LAV-AT-X70 have?

The LAV-AT-X70 has 397,000 LUT4 look-up tables, about 397,000 LUT4 equivalents (637,000 logic cells as published by Lattice).

How many DSP blocks does the LAV-AT-X70 have?

The LAV-AT-X70 has 1,800 18×18 multipliers and 35.6 Mb of block RAM.

Does the LAV-AT-X70 have transceivers?

Yes, 28 SERDES transceivers at up to 25 Gb/s.

What are the alternatives to the LAV-AT-X70?

Devices of similar size in other families include LAV-AT-G70 (Lattice Avant-G), XC2KU050P (AMD Kintex UltraScale+ Gen 2), XC7K480T (AMD Kintex-7).

Which software is used to design with the LAV-AT-X70?

Designs for the LAV-AT-X70 are built with Lattice Radiant.

Other Avant-X devices

Device	LUT4-eq.	Vendor logic	DSP	Block RAM	Max I/O	Transceivers	PCIe
LAV-AT-X30	163K 163K LUT4	262K LC	700	14.4 Mb	298	12 SERDES 25 Gb/s	—
LAV-AT-X50	255K 255K LUT4	409K LC	1,120	22.7 Mb	298	16 SERDES 25 Gb/s	—
LAV-AT-X70	397K 397K LUT4	637K LC	1,800	35.6 Mb	554	28 SERDES 25 Gb/s	—

Source: Lattice Avant-X product page, Family Table, retrieved 2026-10-24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.