LFD2NX-15 vs XC6SLX9
A comparison of the Lattice Certus-NX LFD2NX-15 and the AMD Spartan-6 XC6SLX9 using the data from both vendors' selection guides.
Side-by-side specifications
| LFD2NX-15 | XC6SLX9 | |
|---|---|---|
| Vendor / family | Lattice Certus-NX | AMD Spartan-6 |
| LUTs as published | 12,500 LUT4 | 5,720 LUT6 |
| LUT type | 4-input look-up table | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈12,500 | ≈9,152 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 15,000 LC | 9,152 LC |
| DSP | 12 18×18 multipliers | 16 DSP48A1 slices |
| Block RAM | 0.8 Mb | 0.6 Mb |
| Large RAM | 0.5 Mb | — |
| Max. user I/O | 311 | 200 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 28 nm | 45 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 5 |
| Design tool | Lattice Radiant | AMD ISE Design Suite |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The LFD2NX-15 has about 37% more logic capacity (12.5K vs 9.2K LUT4 equivalents).
They use different logic architectures: the LFD2NX-15 is built from LUT4 and the XC6SLX9 from LUT6, so the raw LUT counts (12.5K vs 5.7K) are not directly comparable.
For arithmetic, the XC6SLX9 has 16 DSP48A1 slices against 12 18×18 multipliers on the LFD2NX-15.
The LFD2NX-15 has more on-chip memory (1.3 Mb vs 0.6 Mb).
The LFD2NX-15 is designed with Lattice Radiant and the XC6SLX9 with AMD ISE Design Suite.
Full specifications
See the complete spec sheets with packages and grades: LFD2NX-15 (Certus-NX) and XC6SLX9 (Spartan-6).