LFE5UM5G-25 vs XC6SLX25T
A comparison of the Lattice ECP5 LFE5UM5G-25 and the AMD Spartan-6 XC6SLX25T using the data from both vendors' selection guides.
Side-by-side specifications
| LFE5UM5G-25 | XC6SLX25T | |
|---|---|---|
| Vendor / family | Lattice ECP5 | AMD Spartan-6 |
| LUTs as published | 24,000 LUT4 | 15,032 LUT6 |
| LUT type | 4-input look-up table | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈24,000 | ≈24,051 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | — | 24,051 LC |
| DSP | 28 18×18 multipliers | 38 DSP48A1 slices |
| Block RAM | 1 Mb | 0.9 Mb |
| Large RAM | — | — |
| Max. user I/O | 197 | 250 |
| Transceivers | 2 × SERDES 5 Gb/s | 2 × GTP 3.2 Gb/s |
| Hard PCI Express | None | Gen1 x1 |
| Hard processor | None | None |
| Process | 40 nm | 45 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 2 |
| Design tool | Lattice Diamond | AMD ISE Design Suite |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 24K and 24.1K LUT4 equivalents.
They use different logic architectures: the LFE5UM5G-25 is built from LUT4 and the XC6SLX25T from LUT6, so the raw LUT counts (24K vs 15K) are not directly comparable.
For arithmetic, the XC6SLX25T has 38 DSP48A1 slices against 28 18×18 multipliers on the LFE5UM5G-25.
Both have transceivers: 2 at up to 5 Gb/s on the LFE5UM5G-25 and 2 at up to 3.2 Gb/s on the XC6SLX25T.
The LFE5UM5G-25 is designed with Lattice Diamond; open source: F4PGA or Yosys + nextpnr-ecp5 with Project Trellis and the XC6SLX25T with AMD ISE Design Suite.
Full specifications
See the complete spec sheets with packages and grades: LFE5UM5G-25 (ECP5) and XC6SLX25T (Spartan-6).