LFMXO5-55T vs Mach-N2 MH06
A comparison of the Lattice MachXO5-NX LFMXO5-55T and the Lattice Mach-N2 Mach-N2 MH06 using the data from both vendors' selection guides.
Side-by-side specifications
| LFMXO5-55T | Mach-N2 MH06 | |
|---|---|---|
| Vendor / family | Lattice MachXO5-NX | Lattice Mach-N2 |
| LUTs as published | 44,167 LUT4 | 40,000 LUT4 |
| LUT type | 4-input look-up table | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈44,167 | ≈40,000 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 53,000 LC | 65,000 LC |
| DSP | 146 18×18 multipliers | 120 18×18 multipliers |
| Block RAM | 2.9 Mb | 4 Mb |
| Large RAM | 2.5 Mb | — |
| Max. user I/O | 297 | 196 |
| Transceivers | 2 × SERDES | 4 × SERDES 16 Gb/s |
| Hard PCI Express | Gen2 | None |
| Hard processor | None | None |
| Process | 28 nm | 16 nm |
| Configuration memory | Internal flash | Internal flash |
| Packages | 1 | 2 |
| Design tool | Lattice Radiant | Lattice Radiant |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The LFMXO5-55T has about 10% more logic capacity (44.2K vs 40K LUT4 equivalents).
For arithmetic, the LFMXO5-55T has 146 18×18 multipliers against 120 18×18 multipliers on the Mach-N2 MH06.
The LFMXO5-55T has more on-chip memory (5.4 Mb vs 4 Mb).
Both have transceivers: 2 at up to 0 Gb/s on the LFMXO5-55T and 4 at up to 16 Gb/s on the Mach-N2 MH06.
The LFMXO5-55T is designed with Lattice Radiant and the Mach-N2 MH06 with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: LFMXO5-55T (MachXO5-NX) and Mach-N2 MH06 (Mach-N2).