LIF-MD6000 vs LIF-MDF6000
A comparison of the Lattice CrossLink LIF-MD6000 and the Lattice CrossLinkPlus LIF-MDF6000 using the data from both vendors' selection guides.
Side-by-side specifications
| LIF-MD6000 | LIF-MDF6000 | |
|---|---|---|
| Vendor / family | Lattice CrossLink | Lattice CrossLinkPlus |
| LUTs as published | 5,936 LUT4 | 5,936 LUT4 |
| LUT type | 4-input look-up table | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈5,936 | ≈5,936 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | — | — |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0.2 Mb | 0.2 Mb |
| Large RAM | — | — |
| Max. user I/O | 37 | 37 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 40 nm | 40 nm |
| Configuration memory | NVCM (one-time programmable) | Internal flash |
| Packages | 5 | 2 |
| Design tool | Lattice Diamond | Lattice Diamond |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 5.9K and 5.9K LUT4 equivalents.
Configuration memory: nvcm (one-time programmable) on the LIF-MD6000, internal flash on the LIF-MDF6000.
The LIF-MD6000 is designed with Lattice Diamond and the LIF-MDF6000 with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: LIF-MD6000 (CrossLink) and LIF-MDF6000 (CrossLinkPlus).