FPGA & adaptive SoC databook · online editionRev. 2026.10

M2GL005 vs XC7S6

A comparison of the Microchip IGLOO2 M2GL005 and the AMD Spartan-7 XC7S6 using the data from both vendors' selection guides.

Side-by-side specifications

M2GL005XC7S6
Vendor / familyMicrochip IGLOO2AMD Spartan-7
LUTs as published6,060 LUT43,752 LUT6
LUT type4-input look-up table6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈6,060≈6,003
CoreScore (SERV cores)——
Vendor logic figure6,060 LE6,000 LC
DSP11 18×18 math blocks (MACC)10 DSP slices
Block RAM0.2 Mb0.2 Mb
Large RAM——
Max. user I/O209100
TransceiversNoneNone
Hard PCI ExpressNoneNone
Hard processorNoneNone
Process65 nm28 nm
Configuration memoryNon-volatile (flash)SRAM
Packages43
Design toolMicrochip Libero SoCAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 6.1K and 6K LUT4 equivalents.

They use different logic architectures: the M2GL005 is built from LUT4 and the XC7S6 from LUT6, so the raw LUT counts (6.1K vs 3.8K) are not directly comparable.

For arithmetic, the M2GL005 has 11 18×18 math blocks (MACC) against 10 DSP slices on the XC7S6.

The XC7S6 has more on-chip memory (0.2 Mb vs 0.2 Mb).

Configuration memory: non-volatile (flash) on the M2GL005, sram on the XC7S6.

The M2GL005 is designed with Microchip Libero SoC and the XC7S6 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: M2GL005 (IGLOO2) and XC7S6 (Spartan-7).