FPGA & adaptive SoC databook · online editionRev. 2026.10

M2GL150 vs XC6SLX150T

A comparison of the Microchip IGLOO2 M2GL150 and the AMD Spartan-6 XC6SLX150T using the data from both vendors' selection guides.

Side-by-side specifications

M2GL150XC6SLX150T
Vendor / familyMicrochip IGLOO2AMD Spartan-6
LUTs as published146,124 LUT492,152 LUT6
LUT type4-input look-up table6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈146,124≈147,443
CoreScore (SERV cores)——
Vendor logic figure146,124 LE147,443 LC
DSP240 18×18 math blocks (MACC)180 DSP48A1 slices
Block RAM4.2 Mb4.7 Mb
Large RAM——
Max. user I/O574540
Transceivers16 × SERDES 5 Gb/s8 × GTP 3.2 Gb/s
Hard PCI ExpressGen2Gen1 x1
Hard processorNoneNone
Process65 nm45 nm
Configuration memoryNon-volatile (flash)SRAM
Packages34
Design toolMicrochip Libero SoCAMD ISE Design Suite

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 146K and 147K LUT4 equivalents.

They use different logic architectures: the M2GL150 is built from LUT4 and the XC6SLX150T from LUT6, so the raw LUT counts (146K vs 92.2K) are not directly comparable.

For arithmetic, the M2GL150 has 240 18×18 math blocks (MACC) against 180 DSP48A1 slices on the XC6SLX150T.

The XC6SLX150T has more on-chip memory (4.7 Mb vs 4.2 Mb).

Both have transceivers: 16 at up to 5 Gb/s on the M2GL150 and 8 at up to 3.2 Gb/s on the XC6SLX150T.

Configuration memory: non-volatile (flash) on the M2GL150, sram on the XC6SLX150T.

The M2GL150 is designed with Microchip Libero SoC and the XC6SLX150T with AMD ISE Design Suite.

Full specifications

See the complete spec sheets with packages and grades: M2GL150 (IGLOO2) and XC6SLX150T (Spartan-6).