FPGA & adaptive SoC databook · online editionRev. 2026.10

M2S060 vs XC7Z012S

A comparison of the Microchip SmartFusion2 M2S060 and the AMD Zynq 7000 XC7Z012S using the data from both vendors' selection guides.

Side-by-side specifications

M2S060XC7Z012S
Vendor / familyMicrochip SmartFusion2AMD Zynq 7000
LUTs as published56,520 LUT434,400 LUT6
LUT type4-input look-up table6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈56,520≈55,040
CoreScore (SERV cores)——
Vendor logic figure56,520 LE55,000 LC
DSP72 18×18 math blocks (MACC)120 DSP slices
Block RAM1.2 Mb2.5 Mb
Large RAM——
Max. user I/O395150
Transceivers4 × SERDES 5 Gb/s4 × GTP 6.25 Gb/s
Hard PCI ExpressGen2Gen2 x4
Hard processor1× Arm Cortex-M31× Arm Cortex-A9
Process65 nm28 nm
Configuration memoryNon-volatile (flash)SRAM
Packages51
Design toolMicrochip Libero SoCAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 56.5K and 55K LUT4 equivalents.

They use different logic architectures: the M2S060 is built from LUT4 and the XC7Z012S from LUT6, so the raw LUT counts (56.5K vs 34.4K) are not directly comparable.

For arithmetic, the XC7Z012S has 120 DSP slices against 72 18×18 math blocks (MACC) on the M2S060.

The XC7Z012S has more on-chip memory (2.5 Mb vs 1.2 Mb).

Both have transceivers: 4 at up to 5 Gb/s on the M2S060 and 4 at up to 6.25 Gb/s on the XC7Z012S.

Configuration memory: non-volatile (flash) on the M2S060, sram on the XC7Z012S.

The M2S060 is designed with Microchip Libero SoC and the XC7Z012S with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: M2S060 (SmartFusion2) and XC7Z012S (Zynq 7000).