FPGA & adaptive SoC databook · online editionRev. 2026.10

SX 2500 vs XC2VP3402

A comparison of the Altera Stratix 10 GX/SX SX 2500 and the AMD Versal Premium Gen 2 XC2VP3402 using the data from both vendors' selection guides.

Side-by-side specifications

SX 2500XC2VP3402
Vendor / familyAltera Stratix 10 GX/SXAMD Versal Premium Gen 2
LUTs as published821,150 ALMs1,170,816 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈1,642,300≈1,873,306
CoreScore (SERV cores)——
Vendor logic figure2,422,000 LE2,561,160 SLC
DSP5,011 variable-precision DSP blocks6,080 DSP Engines
Block RAM195 Mb78 Mb
Large RAM—142 Mb
Max. user I/O1,160736
Transceivers64 × XCVR 28.3 Gb/s, 32 × XCVR 17.4 Gb/s56 × GTM2 112 Gb/s
Hard PCI ExpressGen3 x16Gen6 x8
Hard processor4× Arm Cortex-A532× Arm Cortex-A72
Process14 nm—
Configuration memorySRAMSRAM
Packages32
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The XC2VP3402 has about 14% more logic capacity (1873K vs 1642K LUT4 equivalents).

They use different logic architectures: the SX 2500 is built from ALMs and the XC2VP3402 from LUT6, so the raw LUT counts (821K vs 1171K) are not directly comparable.

For arithmetic, the XC2VP3402 has 6,080 DSP Engines against 5,011 variable-precision DSP blocks on the SX 2500.

The XC2VP3402 has more on-chip memory (220 Mb vs 195 Mb).

Both have transceivers: 96 at up to 28.3 Gb/s on the SX 2500 and 56 at up to 112 Gb/s on the XC2VP3402.

The SX 2500 is designed with Altera Quartus Prime and the XC2VP3402 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: SX 2500 (Stratix 10 GX/SX) and XC2VP3402 (Versal Premium Gen 2).