Ti800 vs XC2VM3654
A comparison of the Efinix Titanium Ti800 and the AMD Versal Prime Gen 2 XC2VM3654 using the data from both vendors' selection guides.
Side-by-side specifications
| Ti800 | XC2VM3654 | |
|---|---|---|
| Vendor / family | Efinix Titanium | AMD Versal Prime Gen 2 |
| LUTs as published | Not published | 318,080 LUT6 |
| LUT type | 4-input look-up table | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈796,262 | ≈508,928 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 796,262 LE | 695,800 SLC |
| DSP | 1,536 DSP blocks | 1,428 DSP Engines |
| Block RAM | 47.2 Mb | 22.2 Mb |
| Large RAM | — | 23.3 Mb |
| Max. user I/O | 480 | 310 |
| Transceivers | 24 × SERDES 25.8 Gb/s | 24 × GTYP 32.75 Gb/s |
| Hard PCI Express | Gen4 x8 | Gen5 x4 |
| Hard processor | 4× RISC-V RV64 | 4× Arm Cortex-A78AE |
| Process | 16 nm | — |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 3 |
| Design tool | Efinix Efinity | AMD Vivado |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The Ti800 has about 56% more logic capacity (796K vs 509K LUT4 equivalents).
They use different logic architectures: the Ti800 is built from LUT4 and the XC2VM3654 from LUT6, so the raw LUT counts (— vs 318K) are not directly comparable.
For arithmetic, the Ti800 has 1,536 DSP blocks against 1,428 DSP Engines on the XC2VM3654.
Both have transceivers: 24 at up to 25.8 Gb/s on the Ti800 and 24 at up to 32.75 Gb/s on the XC2VM3654.
The Ti800 is designed with Efinix Efinity and the XC2VM3654 with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: Ti800 (Titanium) and XC2VM3654 (Versal Prime Gen 2).