GW1N-1P5
GowinLittleBeeThe GW1N-1P5 is a LittleBee FPGA from Gowin, built on a 55 nm process. It provides 1,584 LUT4 look-up tables, 1,584 flip-flops, 0.1 Mb of block RAM, with no hard multipliers. It offers up to 125 user I/O pins. It is available in 4 packages, from the QN48X (7 × 7 mm) to the LQ100X (14 × 14 mm). Designs are built with Gowin EDA.
Specifications
| Vendor | Gowin |
|---|---|
| Family | LittleBee |
| Series | GW1N |
| Process | 55 nm |
| Configuration memory | Embedded flash |
| LUT4-equivalent capacity | 1,584 |
| Look-up tables (LUT4) | 1,584 |
| Flip-flops | 1,584 |
| Distributed RAM | 12 Kb |
| Block RAM | 0.1 Mb (4 × 18 Kb) |
| User flash memory | 96 Kb |
| DSP (18×18 multiplier) | None |
| Max. user I/O | 125 |
|---|---|
| Transceivers | None |
| PCI Express | None |
| Analog / monitor | None |
| Design tool | Gowin EDA |
Packages
| Package | Size (mm) | Pitch (mm) | User I/O | Transceivers |
|---|---|---|---|---|
| QN48X | 7 × 7 | 0.5 | 39 | — |
| QN48XF | 7 × 7 | 0.5 | 40 | — |
| LQ100 | 14 × 14 | 0.5 | 80 | — |
| LQ100X | 14 × 14 | 0.5 | 80 | — |
Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).
Alternatives to the GW1N-1P5
Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| LCMXO2-1200Lattice MachXO2 | 1.3K 1.3K LUT4 | — | — | 0.1 Mb | 107 | — | — |
| iCE40HX1KLattice iCE40 LP/HX/LM | 1.3K 1.3K LUT4 | 1.3K LC | — | 0.1 Mb | 98 | — | — |
| iCE40LP1KLattice iCE40 LP/HX/LM | 1.3K 1.3K LUT4 | 1.3K LC | — | 0.1 Mb | 97 | — | — |
| GW1AN-1Gowin Arora | 1.2K 1.2K LUT4 | — | — | 0.1 Mb | 120 | — | — |
| LCMXO3L-1300Lattice MachXO3 | 1.3K 1.3K LUT4 | — | — | 0.1 Mb | 206 | — | — |
| LCMXO3LF-1300Lattice MachXO3 | 1.3K 1.3K LUT4 | — | — | 0.1 Mb | 206 | — | — |
Compare side by side: GW1N-1P5 vs LCMXO2-1200, GW1N-1P5 vs iCE40HX1K, GW1N-1P5 vs iCE40LP1K.
GW1N-1P5 quick facts
How many LUTs does the GW1N-1P5 have?
The GW1N-1P5 has 1,584 LUT4 look-up tables, about 1,584 LUT4 equivalents.
How many DSP blocks does the GW1N-1P5 have?
The GW1N-1P5 has no 18×18 multipliers and 0.1 Mb of block RAM.
Does the GW1N-1P5 have transceivers?
No, the GW1N-1P5 has no multi-gigabit transceivers. Its user I/O supports up to 125 pins.
What are the alternatives to the GW1N-1P5?
Devices of similar size in other families include LCMXO2-1200 (Lattice MachXO2), iCE40HX1K (Lattice iCE40 LP/HX/LM), iCE40LP1K (Lattice iCE40 LP/HX/LM).
Which software is used to design with the GW1N-1P5?
Designs for the GW1N-1P5 are built with Gowin EDA.
Other LittleBee devices
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| GW1NZ-1 | 1.2K 1.2K LUT4 | — | — | 0.1 Mb | 48 | — | — |
| GW1N-1P5 | 1.6K 1.6K LUT4 | — | — | 0.1 Mb | 125 | — | — |
| GW1N-2 | 2.3K 2.3K LUT4 | — | — | 0.1 Mb | 125 | — | — |
| GW1NR-2 | 2.3K 2.3K LUT4 | — | — | 0.1 Mb | 126 | — | — |
| GW1NZ-2 | 2.3K 2.3K LUT4 | — | — | 0.1 Mb | 125 | — | — |
| GW1NRF-4B | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 25 | — | — |
| GW1N-4 | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 218 | — | — |
| GW1NR-4 | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 218 | — | — |
| GW1NS-4 | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 106 | — | — |
| GW1NS-4C | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 106 | — | — |
| GW1NSR-4 | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 106 | — | — |
| GW1NSR-4C | 4.6K 4.6K LUT4 | — | 16 | 0.2 Mb | 106 | — | — |
| GW1N-9 | 8.6K 8.6K LUT4 | — | 20 | 0.5 Mb | 276 | — | — |
| GW1NR-9 | 8.6K 8.6K LUT4 | — | 20 | 0.5 Mb | 276 | — | — |
Source: Gowin LittleBee product page, retrieved 2026-10-24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.