FPGA & adaptive SoC databook · online editionRev. 2026.10

GW1N-2

GowinLittleBee

The GW1N-2 is a LittleBee FPGA from Gowin, built on a 55 nm process. It provides 2,304 LUT4 look-up tables, 2,016 flip-flops, 0.1 Mb of block RAM, with no hard multipliers. It offers up to 125 user I/O pins. It is available in 19 packages, from the CS42 (2.4 × 2.9 mm) to the LQ144F (20 × 20 mm). Designs are built with Gowin EDA.

2.3KLUT4-equivalent
2.3KLUTs (LUT4)
—18×18 multipliers
0.1 MbBlock RAM
125Max. user I/O
—Transceivers

Specifications

VendorGowin
FamilyLittleBee
SeriesGW1N
Process55 nm
Configuration memoryEmbedded flash
LUT4-equivalent capacity2,304
Look-up tables (LUT4)2,304
Flip-flops2,016
Distributed RAM18 Kb
Block RAM0.1 Mb (4 × 18 Kb)
User flash memory96 Kb
DSP (18×18 multiplier)None
Max. user I/O125
TransceiversNone
PCI ExpressNone
Analog / monitorNone
Design toolGowin EDA

Packages

PackageSize (mm)Pitch (mm)User I/OTransceivers
QN325 × 50.521—
QN32X5 × 50.521—
CS422.4 × 2.90.424—
CS42H2.4 × 2.90.421—
QN486 × 60.441—
QN48H6 × 60.431—
QN8810 × 100.458—
CS100H4 × 40.479—
LQ10014 × 140.580—
LQ100X14 × 140.580—
LQ14420 × 200.5113—
LQ144X20 × 200.5113—
LQ144F20 × 200.5115—
MG493.8 × 3.80.542—
MG1216 × 60.5100—
MG121X6 × 60.5100—
MG1328 × 80.5104—
MG132H8 × 80.595—
MG132X8 × 80.5104—

Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).

Alternatives to the GW1N-2

Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.

DeviceLUT4-eq.Vendor logicDSPBlock RAMMax I/OTransceiversPCIe
LFMXO4-025Lattice MachXO42.1K 2.1K LUT42.6K LC—0.1 Mb204——
LCMXO2-2000Lattice MachXO22.1K 2.1K LUT4——0.1 Mb206——
LFMXO4D-040Lattice MachXO43K 3K LUT43.6K LC—0.1 Mb204——
iCE40HX4KLattice iCE40 LP/HX/LM3.5K 3.5K LUT43.5K LC—0.1 Mb109——
GW1AN-3Gowin Arora3.2K 3.2K LUT4——0.1 Mb208——
iCE40LP4KLattice iCE40 LP/HX/LM3.5K 3.5K LUT43.5K LC—0.1 Mb180——

Compare side by side: GW1N-2 vs LFMXO4-025, GW1N-2 vs LCMXO2-2000, GW1N-2 vs LFMXO4D-040.

GW1N-2 quick facts

How many LUTs does the GW1N-2 have?

The GW1N-2 has 2,304 LUT4 look-up tables, about 2,304 LUT4 equivalents.

How many DSP blocks does the GW1N-2 have?

The GW1N-2 has no 18×18 multipliers and 0.1 Mb of block RAM.

Does the GW1N-2 have transceivers?

No, the GW1N-2 has no multi-gigabit transceivers. Its user I/O supports up to 125 pins.

What are the alternatives to the GW1N-2?

Devices of similar size in other families include LFMXO4-025 (Lattice MachXO4), LCMXO2-2000 (Lattice MachXO2), LFMXO4D-040 (Lattice MachXO4).

Which software is used to design with the GW1N-2?

Designs for the GW1N-2 are built with Gowin EDA.

Other LittleBee devices

DeviceLUT4-eq.Vendor logicDSPBlock RAMMax I/OTransceiversPCIe
GW1NZ-11.2K 1.2K LUT4——0.1 Mb48——
GW1N-1P51.6K 1.6K LUT4——0.1 Mb125——
GW1N-22.3K 2.3K LUT4——0.1 Mb125——
GW1NR-22.3K 2.3K LUT4——0.1 Mb126——
GW1NZ-22.3K 2.3K LUT4——0.1 Mb125——
GW1NRF-4B4.6K 4.6K LUT4—160.2 Mb25——
GW1N-44.6K 4.6K LUT4—160.2 Mb218——
GW1NR-44.6K 4.6K LUT4—160.2 Mb218——
GW1NS-44.6K 4.6K LUT4—160.2 Mb106——
GW1NS-4C4.6K 4.6K LUT4—160.2 Mb106——
GW1NSR-44.6K 4.6K LUT4—160.2 Mb106——
GW1NSR-4C4.6K 4.6K LUT4—160.2 Mb106——
GW1N-98.6K 8.6K LUT4—200.5 Mb276——
GW1NR-98.6K 8.6K LUT4—200.5 Mb276——

Source: Gowin LittleBee product page, retrieved 2026-10-24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.