FPGA & adaptive SoC databook · online editionRev. 2026.10

GW1NR-9

GowinLittleBee

The GW1NR-9 is a LittleBee FPGA from Gowin, built on a 55 nm process. It provides 8,640 LUT4 look-up tables, 6,480 flip-flops, 0.5 Mb of block RAM and 20 18×18 multipliers. It offers up to 276 user I/O pins. It is available in 8 packages, from the MG100P (5 × 5 mm) to the LQ144P (20 × 20 mm). Designs are built with Gowin EDA.

8.6KLUT4-equivalent
8.6KLUTs (LUT4)
2018×18 multipliers
0.5 MbBlock RAM
276Max. user I/O
—Transceivers

Specifications

VendorGowin
FamilyLittleBee
SeriesGW1N
Process55 nm
Configuration memoryEmbedded flash
LUT4-equivalent capacity8,640
Look-up tables (LUT4)8,640
Flip-flops6,480
Distributed RAM16 Kb
Block RAM0.5 Mb (26 × 18 Kb)
User flash memory608 Kb
In-package memorySDR SDRAM 64M, Embedded PSRAM 64-128M
DSP (18×18 multiplier)20
Max. user I/O276
TransceiversNone
PCI ExpressNone
Analog / monitorNone
Design toolGowin EDA

Packages

PackageSize (mm)Pitch (mm)User I/OTransceivers
QN8810 × 100.471—
QN88P10 × 100.471—
MG100P5 × 50.588—
MG100PF5 × 50.588—
MG100PA5 × 50.588—
MG100PT5 × 50.588—
MG100PS5 × 50.588—
LQ144P20 × 200.5121—

Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).

Alternatives to the GW1NR-9

Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.

DeviceLUT4-eq.Vendor logicDSPBlock RAMMax I/OTransceiversPCIe
10M08Altera MAX 108K 8K LUT48K LE240.4 Mb250——
EP4CE10Altera Cyclone IV10K 10K LUT410K LE230.4 Mb179——
10CL010Altera Cyclone 10 LP10K 10K LUT410K LE230.4 Mb176——
LFMXO5-15DLattice MachXO5-NX11.7K 11.7K LUT414K LC160.3 Mb305——
T13Efinix Trion≈12.8K 12.8K LEs12.8K LE240.7 Mb195——
LFE5U-12Lattice ECP512K 12K LUT4—280.6 Mb197——

Compare side by side: GW1NR-9 vs 10M08, GW1NR-9 vs EP4CE10, GW1NR-9 vs 10CL010, GW1NR-9 vs LFMXO5-15D.

GW1NR-9 quick facts

How many LUTs does the GW1NR-9 have?

The GW1NR-9 has 8,640 LUT4 look-up tables, about 8,640 LUT4 equivalents.

How many DSP blocks does the GW1NR-9 have?

The GW1NR-9 has 20 18×18 multipliers and 0.5 Mb of block RAM.

Does the GW1NR-9 have transceivers?

No, the GW1NR-9 has no multi-gigabit transceivers. Its user I/O supports up to 276 pins.

What are the alternatives to the GW1NR-9?

Devices of similar size in other families include 10M08 (Altera MAX 10), EP4CE10 (Altera Cyclone IV), 10CL010 (Altera Cyclone 10 LP).

Which software is used to design with the GW1NR-9?

Designs for the GW1NR-9 are built with Gowin EDA.

Other LittleBee devices

DeviceLUT4-eq.Vendor logicDSPBlock RAMMax I/OTransceiversPCIe
GW1NZ-11.2K 1.2K LUT4——0.1 Mb48——
GW1N-1P51.6K 1.6K LUT4——0.1 Mb125——
GW1N-22.3K 2.3K LUT4——0.1 Mb125——
GW1NR-22.3K 2.3K LUT4——0.1 Mb126——
GW1NZ-22.3K 2.3K LUT4——0.1 Mb125——
GW1NRF-4B4.6K 4.6K LUT4—160.2 Mb25——
GW1N-44.6K 4.6K LUT4—160.2 Mb218——
GW1NR-44.6K 4.6K LUT4—160.2 Mb218——
GW1NS-44.6K 4.6K LUT4—160.2 Mb106——
GW1NS-4C4.6K 4.6K LUT4—160.2 Mb106——
GW1NSR-44.6K 4.6K LUT4—160.2 Mb106——
GW1NSR-4C4.6K 4.6K LUT4—160.2 Mb106——
GW1N-98.6K 8.6K LUT4—200.5 Mb276——
GW1NR-98.6K 8.6K LUT4—200.5 Mb276——

Source: Gowin LittleBee product page, retrieved 2026-10-24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.