10CL080 vs EP4CE115
A comparison of the Altera Cyclone 10 LP 10CL080 and the Altera Cyclone IV EP4CE115 using the data from both vendors' selection guides.
Side-by-side specifications
| 10CL080 | EP4CE115 | |
|---|---|---|
| Vendor / family | Altera Cyclone 10 LP | Altera Cyclone IV |
| Logic (LUT4-equivalent) | 80,000 | 114,000 |
| LUTs as published | 80,000 LUT4 | 114,000 LUT4 |
| Vendor logic figure | 80,000 LE | 114,000 LE |
| DSP | 244 18×18 multipliers | 266 18×18 multipliers |
| Block RAM | 2.7 Mb | 3.8 Mb |
| Large RAM | — | — |
| Max. user I/O | 423 | 528 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 60 nm | 60 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The EP4CE115 has about 42% more logic capacity (114K vs 80K LUT4 equivalents).
For arithmetic, the EP4CE115 has 266 18×18 multipliers against 244 18×18 multipliers on the 10CL080.
The EP4CE115 has more on-chip memory (3.8 Mb vs 2.7 Mb).
The 10CL080 is designed with Altera Quartus Prime and the EP4CE115 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 10CL080 (Cyclone 10 LP) and EP4CE115 (Cyclone IV).