10CL080
AlteraCyclone 10 LPThe 10CL080 is a Cyclone 10 LP FPGA from Altera, built on a 60 nm process. It provides 80,000 LUT4 look-up tables, 2.7 Mb of block RAM and 244 18×18 multipliers. It offers up to 423 user I/O pins. It is available in 3 packages, from the U484 (19 × 19 mm) to the F780 (29 × 29 mm). Designs are built with Altera Quartus Prime.
Specifications
| Vendor | Altera |
|---|---|
| Family | Cyclone 10 LP |
| Series | Cyclone |
| Process | 60 nm |
| Configuration memory | SRAM |
| LUT4-equivalent capacity | 80,000 |
| Look-up tables (LUT4) | 80,000 |
| Logic elements (LEs) | 80,000 |
| Block RAM | 2.7 Mb (305 × 9 Kb) |
| DSP (18×18 multiplier) | 244 |
| Max. user I/O | 423 |
|---|---|
| Transceivers | None |
| PCI Express | None |
| Analog / monitor | None |
| Design tool | Altera Quartus Prime |
Packages
| Package | Size (mm) | Pitch (mm) | User I/O | Transceivers |
|---|---|---|---|---|
| U484 | 19 × 19 | 0.8 | 289 | — |
| F484 | 23 × 23 | 1.0 | 289 | — |
| F780 | 29 × 29 | 1.0 | 423 | — |
Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).
Alternatives to the 10CL080
Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| EP4CE75Altera Cyclone IV | 75K 75K LUT4 | 75K LE | 200 | 2.7 Mb | 426 | — | — |
| T85Efinix Trion | ≈84.1K 84.1K LEs | 84.1K LE | 240 | 4 Mb | 278 | — | — |
| EP4CE115Altera Cyclone IV | 114K 114K LUT4 | 114K LE | 266 | 3.8 Mb | 528 | — | — |
| LFE5U-85Lattice ECP5 | 84K 84K LUT4 | — | 156 | 3.7 Mb | 365 | — | — |
| Ti95Efinix Titanium | ≈93.2K 93.2K LEs | 93.2K LE | 210 | 4.5 Mb | 241 | — | — |
| XC7S75AMD Spartan-7 | 76.8K 48K LUT6 | 76.8K LC | 140 | 3.2 Mb | 400 | — | — |
Compare side by side: 10CL080 vs EP4CE75, 10CL080 vs T85, 10CL080 vs EP4CE115.
10CL080 quick facts
How many LUTs does the 10CL080 have?
The 10CL080 has 80,000 LUT4 look-up tables, about 80,000 LUT4 equivalents.
How many DSP blocks does the 10CL080 have?
The 10CL080 has 244 18×18 multipliers and 2.7 Mb of block RAM.
Does the 10CL080 have transceivers?
No, the 10CL080 has no multi-gigabit transceivers. Its user I/O supports up to 423 pins.
What are the alternatives to the 10CL080?
Devices of similar size in other families include EP4CE75 (Altera Cyclone IV), T85 (Efinix Trion), EP4CE115 (Altera Cyclone IV).
Which software is used to design with the 10CL080?
Designs for the 10CL080 are built with Altera Quartus Prime.
Other Cyclone 10 LP devices
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| 10CL006 | 6K 6K LUT4 | 6K LE | 15 | 0.3 Mb | 176 | — | — |
| 10CL010 | 10K 10K LUT4 | 10K LE | 23 | 0.4 Mb | 176 | — | — |
| 10CL016 | 16K 16K LUT4 | 16K LE | 56 | 0.5 Mb | 340 | — | — |
| 10CL025 | 25K 25K LUT4 | 25K LE | 66 | 0.6 Mb | 150 | — | — |
| 10CL040 | 40K 40K LUT4 | 40K LE | 126 | 1.1 Mb | 325 | — | — |
| 10CL055 | 55K 55K LUT4 | 55K LE | 156 | 2.3 Mb | 321 | — | — |
| 10CL080 | 80K 80K LUT4 | 80K LE | 244 | 2.7 Mb | 423 | — | — |
| 10CL120 | 120K 120K LUT4 | 120K LE | 288 | 3.8 Mb | 525 | — | — |
Source: Altera Cyclone 10 LP FPGA Product Table, 2025.09.24. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.