5AGTD3 vs EP2AGZ350
A comparison of the Altera Arria V 5AGTD3 and the Altera Arria II EP2AGZ350 using the data from both vendors' selection guides.
Side-by-side specifications
| 5AGTD3 | EP2AGZ350 | |
|---|---|---|
| Vendor / family | Altera Arria V | Altera Arria II |
| LUTs as published | 136,880 ALMs | 139,400 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈273,760 | ≈278,800 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 362,000 LE | 349,000 LE |
| DSP | 1,045 variable-precision DSP blocks | 1,040 18×18 multipliers |
| Block RAM | 16.9 Mb | 16 Mb |
| Large RAM | — | — |
| Max. user I/O | 704 | 734 |
| Transceivers | 6 × XCVR 6.5536 Gb/s, 12 × XCVR 10.3125 Gb/s | 24 × XCVR 6.375 Gb/s |
| Hard PCI Express | Gen2 x4 | Gen2 |
| Hard processor | None | None |
| Process | 28 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 3 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 274K and 279K LUT4 equivalents.
For arithmetic, the 5AGTD3 has 1,045 variable-precision DSP blocks against 1,040 18×18 multipliers on the EP2AGZ350.
Both have transceivers: 18 at up to 10.3125 Gb/s on the 5AGTD3 and 24 at up to 6.375 Gb/s on the EP2AGZ350.
The 5AGTD3 is designed with Altera Quartus Prime and the EP2AGZ350 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 5AGTD3 (Arria V) and EP2AGZ350 (Arria II).