FPGA & adaptive SoC databook · online editionRev. 2026.10

M2GL010 vs XC7A12T

A comparison of the Microchip IGLOO2 M2GL010 and the AMD Artix-7 XC7A12T using the data from both vendors' selection guides.

Side-by-side specifications

M2GL010XC7A12T
Vendor / familyMicrochip IGLOO2AMD Artix-7
LUTs as published12,084 LUT48,000 LUT6
LUT type4-input look-up table6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈12,084≈12,800
CoreScore (SERV cores)——
Vendor logic figure12,084 LE12,800 LC
DSP22 18×18 math blocks (MACC)40 DSP slices
Block RAM0.4 Mb0.7 Mb
Large RAM——
Max. user I/O233150
Transceivers4 × SERDES 5 Gb/s2 × GTP 6.6 Gb/s
Hard PCI ExpressGen2Gen2
Hard processorNoneNone
Process65 nm28 nm
Configuration memoryNon-volatile (flash)SRAM
Packages42
Design toolMicrochip Libero SoCAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 12.1K and 12.8K LUT4 equivalents.

They use different logic architectures: the M2GL010 is built from LUT4 and the XC7A12T from LUT6, so the raw LUT counts (12.1K vs 8K) are not directly comparable.

For arithmetic, the XC7A12T has 40 DSP slices against 22 18×18 math blocks (MACC) on the M2GL010.

The XC7A12T has more on-chip memory (0.7 Mb vs 0.4 Mb).

Both have transceivers: 4 at up to 5 Gb/s on the M2GL010 and 2 at up to 6.6 Gb/s on the XC7A12T.

Configuration memory: non-volatile (flash) on the M2GL010, sram on the XC7A12T.

The M2GL010 is designed with Microchip Libero SoC and the XC7A12T with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: M2GL010 (IGLOO2) and XC7A12T (Artix-7).