SX 400 vs TX 400
A comparison of the Altera Stratix 10 GX/SX SX 400 and the Altera Stratix 10 TX TX 400 using the data from both vendors' selection guides.
Side-by-side specifications
| SX 400 | TX 400 | |
|---|---|---|
| Vendor / family | Altera Stratix 10 GX/SX | Altera Stratix 10 TX |
| LUTs as published | 128,160 ALMs | 128,160 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈256,320 | ≈256,320 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 378,000 LE | 378,000 LE |
| DSP | 648 variable-precision DSP blocks | 648 variable-precision DSP blocks |
| Block RAM | 30 Mb | 30 Mb |
| Large RAM | — | — |
| Max. user I/O | 374 | 384 |
| Transceivers | 16 × XCVR 28.3 Gb/s, 8 × XCVR 17.4 Gb/s | 24 × GXE 57.8 Gb/s |
| Hard PCI Express | Gen3 x16 | None |
| Hard processor | 4× Arm Cortex-A53 | 4× Arm Cortex-A53 (optional) |
| Process | 14 nm | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 1 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 256K and 256K LUT4 equivalents.
Both have transceivers: 24 at up to 28.3 Gb/s on the SX 400 and 24 at up to 57.8 Gb/s on the TX 400.
The SX 400 is designed with Altera Quartus Prime and the TX 400 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: SX 400 (Stratix 10 GX/SX) and TX 400 (Stratix 10 TX).