XCAU10P

AMDArtix UltraScale+

The XCAU10P is an Artix UltraScale+ FPGA from AMD, built on a 16 nm process. It provides 44,000 LUT6 look-up tables (96,000 system logic cells), about 70,400 LUT4 equivalents, 88,000 flip-flops, 3.5 Mb of block RAM and 400 DSP slices. It offers up to 228 user I/O pins and 12 GTH transceivers at up to 16.3 Gb/s, with hard PCI Express Gen4 x8 blocks. It is available in 3 packages, from the UBVA368 (11.5 × 9.5 mm) to the FFVB676 (27 × 27 mm). Temperature grades: extended, industrial. Designs are built with AMD Vivado.

70.4KLUT4-equivalent

44KLUTs (LUT6)

400DSP slices

3.5 MbBlock RAM

228Max. user I/O

12Transceivers (16.3 Gb/s)

Specifications

Vendor	AMD
Family	Artix UltraScale+
Series	UltraScale+
Process	16 nm
Configuration memory	SRAM
LUT4-equivalent capacity	70,400
Look-up tables (LUT6)	44,000
System logic cells	96,000
Flip-flops	88,000
Distributed RAM	1,024 Kb
Block RAM	3.5 Mb (100 × 36 Kb)
DSP (DSP slice)	400
Clock management tiles	3

Max. user I/O	228
HD I/O	72
HP I/O	156
GTH transceivers	12 × 16.3 Gb/s
PCI Express	Gen4 x8
Analog / monitor	System Monitor
Design tool	AMD Vivado

Packages

Package	Size (mm)	Pitch (mm)	User I/O	Transceivers
UBVA368	11.5 × 9.5	0.5	128	8
SBVB484	19 × 19	0.8	204	12
FFVB676	27 × 27	1.0	228	12

Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).

Speed and temperature grades

Temperature grade	Junction range	Speed grades
Extended (E)	0 to 100 °C	-1, -2
Industrial (I)	−40 to 100 °C	-1, -2, -1L

Alternatives to the XCAU10P

Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.

Device	LUT4-eq.	Vendor logic	DSP	Block RAM	Max I/O	Transceivers	PCIe
XC7K70TAMD Kintex-7	65.6K 41K LUT6	65.6K LC	240	4.7 Mb	300	8 GTX 12.5 Gb/s	Gen2
XC7A100TAMD Artix-7	101K 63.4K LUT6	101K LC	240	4.7 Mb	300	8 GTP 6.6 Gb/s	Gen2
GW5AT-75Gowin Arora V	86.7K 86.7K LUT4	—	213	4.5 Mb	312	8 SERDES 12.5 Gb/s	Gen3
EP4CGX75Altera Cyclone IV	74K 74K LUT4	74K LE	198	4.1 Mb	310	8 XCVR 3.125 Gb/s	Gen2
MPF100TMicrochip PolarFire	109K 109K LUT4	109K LE	336	6.9 Mb	284	8 SERDES 12.7 Gb/s	Gen2
Certus-N2 CT16Lattice Certus-N2	98K 98K LUT4	160K LC	360	8 Mb	298	8 SERDES 16 Gb/s	—

Compare side by side: XCAU10P vs XC7K70T, XCAU10P vs XC7A100T, XCAU10P vs GW5AT-75.

XCAU10P quick facts

How many LUTs does the XCAU10P have?

The XCAU10P has 44,000 LUT6 look-up tables, about 70,400 LUT4 equivalents (96,000 system logic cells as published by AMD).

How many DSP blocks does the XCAU10P have?

The XCAU10P has 400 DSP slices and 3.5 Mb of block RAM.

Does the XCAU10P have transceivers?

Yes, 12 GTH transceivers at up to 16.3 Gb/s.

What are the alternatives to the XCAU10P?

Devices of similar size in other families include XC7K70T (AMD Kintex-7), XC7A100T (AMD Artix-7), GW5AT-75 (Gowin Arora V).

Which software is used to design with the XCAU10P?

Designs for the XCAU10P are built with AMD Vivado.

Other Artix UltraScale+ devices

Device	LUT4-eq.	Vendor logic	DSP	Block RAM	Max I/O	Transceivers	PCIe
XCAU7P	59.2K 37K LUT6	82K SLC	216	3.8 Mb	248	4 GTH 16.3 Gb/s	Gen3
XCAU10P	70.4K 44K LUT6	96K SLC	400	3.5 Mb	228	12 GTH 16.3 Gb/s	Gen4
XCAU15P	125K 78K LUT6	170K SLC	576	5.1 Mb	228	12 GTH 16.3 Gb/s	Gen4
XCAU20P	174K 109K LUT6	238K SLC	900	7 Mb	228	12 GTY 32.75 Gb/s	Gen3
XCAU25P	226K 141K LUT6	308K SLC	1,200	10.5 Mb	304	12 GTY 32.75 Gb/s	Gen3

Source: AMD UltraScale+ FPGAs Product Selection Guide, XMP103 (v2.8). Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.